AGS-6/2
Được thiết kế để tạo ra hỗn hợp khí dùng ở nồng độ cần thiết để ngăn chặn một đám cháy.
Được khuyến cáo dùng cho hệ thống chữa cháy, các cơ sở khối lượng trung bình.
-
The generator is a small cylinder with a metal case, on the lateral surface of which are located the outlets in a certain order. The contact cooler inside the body of the generator allows for the creation of the aerosol stream of low temperature.
Principle of operation:
By applying an electrical or thermal pulse to the activation unit, a solid aerosol charge is ignited. Combustion products passing through the contact cooler go through the outlets of the generator in the protected space.
Manufacturer’s warranty:
The manufacturer guarantees the generator to abide by the technical requirements and Russian standards if the consumer adheres to the conditions specified in the instruction manual.
The warranty period for the generator – 18 months.
Utilization Period – 5 years.
Lifetime – 10 years.
Maximum protected volume conditionally sealed room (d * <0,001 m-1) 52 m3 Curb weight of the generator 14.0 kg Weight aerosol charge 3.5 kg Working time 40 Dimensions Width 294 mm Height 420 mm Activation unit BP-7.5-7.5 VRTH VEE, VELTH Resistance of the activation unit 7.5± 0.8 ohm 2.5 – 4 ohm Minimum start-up current 1А 0.4 А Starting voltage 8 – 30 1.5 – 24 The duration of the trigger pulse not less than 1.5 sec not less than 0.1 sec The inertia of the generator start <1.5 sec Operating Conditions Operating Temperature Range ± 50 °С. relative humidity at 25 ° C. 98 % mechanical influences (in the frequency range up to 100 Hz) 1g Classes of fire-fighting -