AGS-12/2,2
Standalone aerosol fire extinguishing unit with a thermal starter AGS 12/2,2
Standalone aerosol fire extinguishing unit with a thermal starter AGS 12/2,2 is a saturation extinguisher and intended to control and extinguish fires of flammable and combustible liquids, solid fuels and electrical equipment, including energized one.
-
Weight of the unit, kg 0,65 + 0,07 Weight of aerosol-forming charge, kg 0,11 ± 0,01 Fire control capability, kg/m³ 0,05 Maximal protected volume of the nominally tight room (δ* < 0,001m-1), m³ 2,2 Dimensions, mm (diameter х height) 105 х 28 Operating time, sec 10 + 1,0 Classes of fire fighting
-
Operating Principle
By applying an electrical or thermal pulse to the activation unit the aerosol-forming block ignites, the combustion of which forms gas-aerosol fire-extinguishing mixture consisting of fine particulates (potassium salts being potent inhibitors) about 70% of the original weight of the composition and the gas phase, which enters the protected volume.
Pre-starting procedure
Standalone aerosol fire extinguishing unit with a thermal starter AGS 12/2,2 shall be installed on the enclosing structures.
Fastening is carried out using different types of hardware through 3mm diameter holes or double sided tape.
Installation by tape should be in a heated room, under normal climatic conditions, then a temperature mode should not be changed for 3 hours.
-
Download, PDF (150 Kb)
-