Đóng

06/12/2016

AGS-11/3

Universal Air Cooled Generator AGS-11/3

ags11-2

Designed for generating gas-aerosol mixture at concentrations required to extinguish a fire.

Applies to:

AGS-11/3 is recommended for the protection of vehicles, electronic equipment, high-voltage power installations, various high-frequency devices operating in including vehicles, since it corresponds to the requirements of vibration loads on railway / road and air transport.

  • AGS-11/3 is a compact, low metal cylindrical body with a nozzle opening on the exterior side. With its small size, the generator provides a significant protective capacity – up to 6,0m3.

    By changing the design of the system, the mass fraction of the condensed phase has been significantly reduced and lowered the temperature of the generator frame.

    Principle of operation:

    By applying an electrical or thermal pulse on activation node *a solid aerosol charge is ignited. Products of combustion exit through the nozzle gap of the generator and enter the protected area.

    Manufacturer’s warranty:

    The manufacturer guarantees the generator to the technical requirements and Russian standards if the consumer follows the conditions specified in the instruction manual.

    The warranty period for the generator – 18 months.

    Exploitation period – 5 years.

    Service period – 10 years.

    Certificate (AGS-11)

    Instruction manua

  • Maximum protected volume of conditionally sealed room
    (d * <0,001 m-1)
    6,0m3
    Curb weight of the generator 1.3 kg
    Weight aerosol charge 0.3 kg
    Working time 20
    Dimensions
    Width 150 mm
    Height 85 mm
    Activation starter UST-7.5
    Resistance of the activation starter 7,8 ± 0,8 Ohm
    Minimum start-up current 1.5А
    Starting voltage 2
    The duration of the trigger pulse not less than 2.0 sec
    The inertia of the generator starter <1.5 sec
    Operating Conditions
    Operating Temperature Range ± 50 °С.
    relative humidity at 25 ° C. 98%
    Классы тушения пожаров